CO2 for IHP CO2 Air Pistol

TenX · Post by **TenX** » Thu Aug 07, 2008 1:49 am

Hi all.
Can someone give me leads on filling up the CO2 cylinder that comes alongwith the IHP Air Pistol, in Bangalore area?
I tried a few shops in Jayanagar, but the shop keeper refused, citing recent blasts

Post by **Mack The Knife** » Thu Aug 07, 2008 9:17 am

Contact Shankar.

TenX · Post by **TenX** » Thu Aug 07, 2008 9:31 am

I had. Basically, I cannot go in for a big (the 2' one) cylinder which I can keep at home, and only needed contacts where I could fill in the small one, on and off...

Post by **Mack The Knife** » Thu Aug 07, 2008 9:40 am

Tough titty.

striker · Post by **striker** » Thu Aug 07, 2008 7:42 pm

TenX";p="49250 wrote: I had. Basically, I cannot go in for a big (the 2' one) cylinder which I can keep at home, and only needed contacts where I could fill in the small one, on and off...

is this wat u have for ur refilling?

striker

striker · Post by **striker** » Thu Aug 07, 2008 7:43 pm

Post by **dev** » Thu Aug 07, 2008 8:09 pm

Normally industrial and medical gas suppliers will fill the cylinder up for you. Or look for a friend who has metal work done. He might have a large Co2 cylinder. If you have a adapter or filling tool made by them then you are in the gravy

.

Dev

striker · Post by **striker** » Thu Aug 07, 2008 8:35 pm

The above cylinder is used in my home soda maker available for 400rs for new cylinder and 60 rs for exchange of empty.the dia of cylinder is 2" aprox & 1.5' length.and i think with suitable desi adapter we can able to fill the ihp co2 pistol

cheers
sankar

TenX · Post by **TenX** » Thu Aug 07, 2008 10:11 pm

Thanks all for the help.
I have the smaller IHP cylinder, plus the adapter given with it. I can ix it to a larger cylinder and refill.
But I liked Striker's idea, and will try to get one of that. Will try to source it tom.
Will also post a pic of the set that I have tom.

striker · Post by **striker** » Thu Aug 07, 2008 11:20 pm

tenx
i think the below web id will guide u better

http://www.mrbutlers.com/appliances/lin ... cater.html

try to post ur co2 pistol and adapter pics

cheers

TenX · Post by **TenX** » Fri Aug 08, 2008 12:31 am

Thanks a lot for the link.
I will post pics tomorrow, since the pics are coming out brutal in the night. I also need to post a few pics an aonther thread...

TenX · Post by **TenX** » Fri Aug 08, 2008 11:43 am

Here is the pic of my CO2 with cyliner and adapter.

striker · Post by **striker** » Fri Aug 08, 2008 12:17 pm

Tenx
how many useable shots u get for a fill,&how many refilling last for the small cylinder.

sankar

TenX · Post by **TenX** » Fri Aug 08, 2008 12:38 pm

I get about 12 refills from the small one to the gun, and get about 50 to 20 shots per refill, which starts to reduce as the refill count gets higher. SO, 1st refill gives about 50 shots, and the 12th refill gives about 20 shots. Sometimes the climate matters a lot, and I have noticed that if I refill in a colder climate, I get more refills.

TenX · Post by **TenX** » Fri Aug 08, 2008 10:20 pm

Striker/all
I tried theMr. Butler stuff today, but the nozzle does not match either the adapter, the CO2 pistol or the cylinder I have. I would have to make another adapter to match the Mr. Butler stuff and the Pistol, but it will require another type of adapter that will pinch open the needle that Mr. Butler has.
Any suggestions?

Indians For Guns

Indians For Guns

CO2 for IHP CO2 Air Pistol

CO2 for IHP CO2 Air Pistol

Re: CO2 for IHP CO2 Air Pistol

Re: CO2 for IHP CO2 Air Pistol

Re: CO2 for IHP CO2 Air Pistol

Re: CO2 for IHP CO2 Air Pistol

Re: CO2 for IHP CO2 Air Pistol

Re: CO2 for IHP CO2 Air Pistol