12GA FH to 700HE to 4bore- Magnum Results-

Discussions related to firearms that do not fit in anywhere else.
Post Reply
User avatar
TC
Veteran
Veteran
Posts: 1805
Joined: Tue Dec 05, 2006 11:50 am
Location: Kolkata

Re: 12GA FH to 700HE to 4bore- Magnum Results-

Post by TC » Sun Feb 15, 2015 8:58 pm

This is an interesting combination Hubel585
Experts in 12 ga handloads on our forum will surely get inspired :D

Thanks for sharing all your experiments and experience with us so patiently. Really Commendable.

:clap: :clap: :clap:

I only have theoretical knowledge on the subject so keep reading them to widen my knowledge

:cheers:
TC

For Advertising mail webmaster
hubel585
Almost at nirvana
Almost at nirvana
Posts: 205
Joined: Mon Oct 03, 2011 2:08 pm

Re: 12GA FH to 700HE to 4bore- Magnum Results-

Post by hubel585 » Wed Apr 22, 2015 7:49 pm

Here is picture of our NEF 12ga FH with Hogue Compstock. It has the
recoiling cam and springs in the hollow butt plus some weght,

Image

Here is a variety of slugs and bullets that fit in the 12ga dangerous
game slug, lock on sabot. BPI sells that DG slug.

.Image

There is couple 585 videos on Swann Gunsmithing's Facebook site;
Of our 585HE in first Ruger #1, that was done in Australia.It was set up
for the poster Tankhunter on the AR big bore forums. That gun killed the
first AUS buff, killed by a 585HE, that I posted picture of above. You can
go direct to the page and click on the videos to watch the test firings..

https://www.facebook.com/swanbarrels/videos


Here is picture our 585HE in a Montana PH action in a MPI stock, with the
style of a CZ stock and metal will be finished with a Gun Kote finish.


Image


Here is picture of a 585HE we did in a Mauser 98 as a
singleshot test gun. We used a composite stock we
adapted to fit action. Weighted to 12 lbs.
Enfield in back, you can see it is longer.

Image

And speaking of singleshots a fellow in the Yukon is
just finishing up one in a Ruger #1.And the 24hr Campfire
forum has over a million views of this thread, ..ED

hubel585
Almost at nirvana
Almost at nirvana
Posts: 205
Joined: Mon Oct 03, 2011 2:08 pm

Re: 12GA FH to 700HE to 4bore- Magnum Results-

Post by hubel585 » Thu Jun 25, 2015 8:40 pm

The 12ga FH isn't the first wildcat case built on BMG brass, it was preceded by
target rounds like the necked down 338 Talbot, the cut off 700 DKT for big game,
necked down to .416 and . 458, and more, but the following one was way
before them, in my favorite rifle caliber, for .585" bullets.

One of first modern era 585 caliber wildcats, since WW2, the 575 Miller-Greiss Magnum,
was first mentioned in the fifties, It was made from BMG brass shortened to 2.70" long
and necked up from 50 cal to .585". But actually if cut off first, it would be annealed, necked
down to hold 585 bullet. Fairly sharp shoulder.

They rebated the rim quite a ways down to .618" to maybe fit 98 Mauser bolt.
Maybe used a special hogged out, reworked action. Listed as
shooting 750gr bullet about 2400 fps. It holds about 150gr of ball powder under
a 750 gr bullet, maybe little less than 3" 50cal spotter case, where our 585HE holds
180gr under a 750gr'.

We made one for experimenting on a full length BMG case.With rim left same as the base
and would need a BMG or PH sized bolt and action. I'm glad to be a big bore wildcatter,
and happy to be in the company of big bore nuts, old and new. Years ago when guys did
big wildcats on BMGs, they took what was available, full length BMGs to rework, and but
maybe back then they could have used the 3" BMG spotter case, by shortening the neck,
if they could have found couple barrels full.

But it takes a lot of work to reform and shorten cases that much like M&G, with the multiple dies,
multiple annealings, and case trimming and extreme reworking of regular rifle actions,
which is why I like our 585 case, simple and straight, any regular, long bolt action, or
falling blocks, break actions, etc, a 585 good for dozen or more heavy loadings,
and moderate loads, last forever..

For our 585HE , made it a size, actually new belted size, to fit regular size, long bolt guns,
(not BMG actions)that didn't have to be used from tripod so to speak, and could be put in a favorite
gun of many, the Ruger #1, other falling blocks, without taking metal out of the feed trough.
To get the same and/or more powder space as a cut back, really shortened, BMG case, like M&G,
wildcatted to 585, or other short cases, we made longer case and worked with guys
with a group buy, to get a factory run made. A miracle. We thank all gun nuts for the help.

Here is picture from the great site, cartridgecollector dot net, of the M&G Mag .Ed

Image

hubel585
Almost at nirvana
Almost at nirvana
Posts: 205
Joined: Mon Oct 03, 2011 2:08 pm

Re: 12GA FH to 700HE to 4bore- Magnum Results-

Post by hubel585 » Sat Sep 26, 2015 6:45 am

Sorry to be away so long, health, getting old, and interruptions.
Here is picture of a lightweight Barnes bullet in 24ga FH.
Guys cut the back off of 750gr bullet off to get 500gr weight.

Image

Here is picture 58 cal Minie slug that's little long on the side for our 12ga
sabot, with the front of the slug above the grooves swaged to fit in
sabot. The swaged front third of the slug fits next to the internal ridge in
sabot and the sabot doesn't bulge out.Just run front into a die
and punch it back out.

Image

And some info about 12ga FH and other hopped up shotgun slug loads,
You know we use couple of the rifle powders, slower than shotgun powders, .
We like to use IMR 4759 for some loads and slower RE17 for others where
we have room for larger charges. Those two powders are ignited ok in large
diameter cases like 12ga, 10ga, 16ga, etc, without needing BMG primers.
But we have always been looking for easy to ignite powders of the RE17
type, in all temps, that has a speed between the IMR 4759 and the RE17.
RE17 uses different mfg process to put the deterrents in the powder kernel to
control speeds, which allows much easier ignition, because the deterrent is
not all on the outside of the kernel. RE17 ignites easier compared to 98%
majority of rifle powders with all the deterrent on the outside.

But there are some out there made by Nitrochemie Switzerland, who makes
RE17, RE26, RE33, etc, for Alliant. It's the ' RELOAD SWISS' brand available
for those folks in UK and Europe, They are called- RS 40, about same speed
as RE12, RS 50 & 52, about same speed as RE15, RE60 & 62 same as RE17.
Also one ' Vihta Vouri ' powder called TR140 available over there,
that Nitrochemie made..

Many guys can't get IMR 4759 anymore, some can't get RE17.
Be nice to get some of RS 40-50-52 powders or the V V TR140 shipped, if ever
possible, into the states, would really be great help for hairy slug load work.
But the guys in UK/EU now can load some real hairy, slow powder, slug loads,
we experimented with, even though not having IMR 4759....Ed

hubel585
Almost at nirvana
Almost at nirvana
Posts: 205
Joined: Mon Oct 03, 2011 2:08 pm

Re: 12GA FH to 700HE to 4bore- Magnum Results-

Post by hubel585 » Sat Oct 31, 2015 1:04 pm

We got guys wildcatting our 585HE case,


Image

Here is picture of that 375 Warlord next to our 585 case he made it from.
He is going to make couple later necked down to 416, and 458.
There is another guy working on doing one necked down to 357 wildcat.

Image

Here is a picture of our poster Biebs on AR, 585 HE, in a MPI stock.
He used a big Enfield action, with a fancy jeweled bolt.

Image

We found couple other big actions for our 585, that can even feed really
long overall length loaded cases, like 4.5" long or more, if you are
using long pointed bullets for real long range target and hunting work.
One is Lawton 8000 Cheytac action, and the other is Stiller Cheytac actions
made similar, just a newer version. Both actions come in 1.45" diameter
and a 1.60" diameter receivers. .Ed

Image

hubel585
Almost at nirvana
Almost at nirvana
Posts: 205
Joined: Mon Oct 03, 2011 2:08 pm

Re: 12GA FH to 700HE to 4bore- Magnum Results-

Post by hubel585 » Tue Nov 10, 2015 4:37 am

Here we kill two birds with one stone so to speak,

Best case sizer is the MEC Collet Super Sizer and it can double
as a case holder when we roll crimp. Much better hold than
the ones made to hold cases for crimping, that cost a lot.
Save cost of a holder, plus have best sizer around

Image

Here is couple different setups our guys checking for our 585HE
in a long, Lawton Cheytac action. First laminated thumbhole stock.
Second in a Hogue Compstock. The action can mount a scope rail
like shown on the table in 1st picture or a receiver sight in 2nd picture.
The scope rail is a piccatiny type.

Image

Image

The stocks used were wide ones for REM long actions, just add recoil
block ahead of recoil inleting for the longer action, drill new screw hole
Open the stock forward to original bolt hole for longer cases and mag.

About Enfields for our case, one of my favorites, Some don't like the
sporterizing, welding bottom metal straight. Many think straightening
is a huge job needing special jigs. Easier just use one being added on for a jig
with a bolt, to weld on the straight extension, Do top weld, then cut old
extension that is under off with a thin cutting wheel, then weld bottom.
When we bolt the short piece on the one we are straightening, we grind
the short slant off so the added piece lays on there flat.
The one you cut off can be used as the top extension for the next one!!!
Just keep on building...Ed

Image

hubel585
Almost at nirvana
Almost at nirvana
Posts: 205
Joined: Mon Oct 03, 2011 2:08 pm

Re: 12GA FH to 700HE to 4bore- Magnum Results-

Post by hubel585 » Thu Dec 10, 2015 6:44 pm

Here is a fancy stocked 24ga FH built on a NEF, built by
a guy in Canada. Its straight back, high comb
stock, handles recoil great.Neat looking work... Ed

Image


About our 2.17" 585 BB case for lever guns, pistols, etc,.
It is made from our 585 case cut back to 2.17" long.
With loaded length of about 2.8" work in lever guns, etc.
Work in 71s, later 1886s, Henry steel frames made for 45-70.
One guy is putting one in single shot action set up with
Contender style pistol grip for testing in long rifle barrel,
to simulate pistol recoil..Be very brisk recoil in a case
that holds 110 gr powder under a light Minie bullet.
Maybe work in a Rossi Judge with heavy barrel.
Or rolling block rifles and pistols...Gonna try one in 1887.
Got first one in one of our guys Greener GP for testing..

In some ways big bore shotguns and rifles are sexy.
By looking at the shape of the fire and smoke cloud....
Thanks for picture, to the great NitroExpress Forums site.


Image

Here is picture of another neat sporterizing deal for Enfields.
On those without rear bridge pocket welded up, we just mill down
and shape it so debth of the pocket matches bottom section of
weaver rail and screw or epoxy it in. Shape to drive in hole tight.
Can use as a rear scope ring mount or mount for peep sight
like a compact UTG sight...Ed

Image

hubel585
Almost at nirvana
Almost at nirvana
Posts: 205
Joined: Mon Oct 03, 2011 2:08 pm

Re: 12GA FH to 700HE to 4bore- Magnum Results-

Post by hubel585 » Mon Jan 25, 2016 5:30 am

A poster reading our threads said '' I'm slowly becoming a recoilapheliac''..
That is neat term , and very glad that folks are catching the big bore fever.

Here is a simple, yet neat peep sight we can use on the rear sporterized
bridges of Enfields, works on other rear bridges also.Including shotguns.
I like peep sights the best for most shooting. They also come with flat
bottoms also for bridges and receivers that are flat on top.

Image

Another picture of the 585 HE one of our guys put in the MPI stock..

Image




On straight sided cases like our 585 HE the die set has a mouth expander
die to make it easy to insert bullets. The die flares the mouth, but I always
felt that doing what is really a relative relatively sharp flare, and then the slight
roll crimping the same area of the case into a groove on the
bullet or slug, shortens case life.

So I just use expander plug out of the die, by hand, using just the bottom of
of the expander plug and just push it in a little, wobble it around a small
amount, bullet goes in ok, case mouths last longer, good for dozens of loads,
with moderate hunting and target loads.Only takes a few seconds and less
work that has to be done in the press ... Ed

Image

User avatar
shooter
Old Timer
Old Timer
Posts: 2002
Joined: Tue May 22, 2007 8:55 pm
Location: London

Re: 12GA FH to 700HE to 4bore- Magnum Results-

Post by shooter » Mon Feb 08, 2016 9:19 pm

One question:
How does one meet you?
You want more gun control? Use both hands!

God made man and God made woman, but Samuel Colt made them equal.

One does not hunt in order to kill; on the contrary, one kills in order to have hunted. by Jose Gasset.

hubel585
Almost at nirvana
Almost at nirvana
Posts: 205
Joined: Mon Oct 03, 2011 2:08 pm

Re: 12GA FH to 700HE to 4bore- Magnum Results-

Post by hubel585 » Sun Feb 14, 2016 1:28 pm

I'm in MI, USA

Here is picture of a hard plastic molded shotgun cases, holding
a slug, without crimping, a company is experimenting with.
These with light brass slugs supposed to do over 2000 fps.

Image


Here is video by Corlanes Sporting, Dawson Creek, BC, CAN.
Known as Rocky Mtn Rifle. Video is on Youtube of testing our
585 HE in a barreled action, they are building for a guy. They are
shooting it into their big bullet trap with test load..



Allan and Grant Swan in Australia are building 585HE for a guy,
the second one they built. First one killed the buff pictured earlier .
AHR and Vestals will make folks here in US a 585 HE.
Here is another view of a Lawton action big enough for 585HE..

Image

Picture of Rossi singleshot with 585 barrel mono-blocked into it,
chambered for our 585 BB 2.17" case, for testing in a light rifle
with just pistol grip to simulate the case in pistols. Others going to
put case in leverguns, autoloaders. We got lots of cases. Ed

Image

hubel585
Almost at nirvana
Almost at nirvana
Posts: 205
Joined: Mon Oct 03, 2011 2:08 pm

Re: 12GA FH to 700HE to 4bore- Magnum Results-

Post by hubel585 » Fri Mar 18, 2016 5:53 am

Here is picture of a great old time 8bore double.
I like those old outside hammer, big bore guns.

Image

The style of most break actions singles aren't the greatest, that we
we used for 12ga FH, 10ga FH, other caliber barrels we mono-blocked
in them like .585" bore for 585HE and 24ga FH.. One that is close
that we have, is the Magtech.

Well the guys have found one that is super strong lockup and looks
real nice. And has the good quality look. It comes 12ga light shot barrel,
soon be monoblocked to rifled 24ga FH, the little brother of the 585HE.

Told company if they did them NEFUltra style, rifled, heavy 12ga slug barrel,
for shotgun caliber only hunters, they couldn't make them fast enough.

Image


Here is picture of 585HE, In an Enfield that Bret and Darrel in Minn
set up with great camo finish, with nice brake job. It is in a Hogue, recoil
reducing, rubber coated, Compstock.Great job they did.. Ed

Image

Here is picture from the rear of the Enfield we mounted the short Weaver
rail piece on. It is mounted in the sight pocket that the actions have;
Can hold scope ring or a rear peep sight like UTG makes.. Ed

Image

hubel585
Almost at nirvana
Almost at nirvana
Posts: 205
Joined: Mon Oct 03, 2011 2:08 pm

Re: 12GA FH to 700HE to 4bore- Magnum Results-

Post by hubel585 » Thu Apr 14, 2016 4:53 pm

We will have arrived when we have this big bore in our back yard,
Kind of a neat suppressor,

Image


Here is folder shotgun, the guys set up as 24ga FH.
Shoots nice, looks nice, it a more expensive break action,
compared to many others.

Image


Here is another view of what we feel is a nearly perfect
break action. Guy is making a strong 24ga FH with it.

Image


Here is picture of a 585HE MRC PH a guy set up..

Image

hubel585
Almost at nirvana
Almost at nirvana
Posts: 205
Joined: Mon Oct 03, 2011 2:08 pm

Re: 12GA FH to 700HE to 4bore- Magnum Results-

Post by hubel585 » Thu May 12, 2016 10:16 am

Here is a Midland break action a guy is doing in 24ga FH.

Image

Here is old catalog picture of different stuff used in old days
for shotgun loads. Some would be hairy in brass cases

Image

Here is picture of a MN a guy is doing 585HE in..
It is singleshot. Redid bolt handle, mounted it on the bolt
further back, so the port could be lengthened for our long case.
Also puts handle back where it is easier to grab.
Needs, more shaping, polishing, blueing, scope rail added.

Image

hubel585
Almost at nirvana
Almost at nirvana
Posts: 205
Joined: Mon Oct 03, 2011 2:08 pm

Re: 12GA FH to 700HE to 4bore- Magnum Results-

Post by hubel585 » Sat Jun 18, 2016 6:34 pm

There are guys on Castboolits forum experimenting with
locking on plastic bases securely on slugs.
Making their own front heavy ones for smoothbores.

Here is picture of our 585BB case next to long 585HE.

Image


Here is another view of the great camo job on the
585HE Enfield, a top view. Ed

Image

hubel585
Almost at nirvana
Almost at nirvana
Posts: 205
Joined: Mon Oct 03, 2011 2:08 pm

Re: 12GA FH to 700HE to 4bore- Magnum Results-

Post by hubel585 » Sun Jul 24, 2016 9:34 am

Here is a helix driver seal we made by cutting base from helix driver

wadcup, good for fullbore roundballs that are too big to go in cup.

Best one to cut off is shortest `12ga one BPI has.


Image



Here is picture of a 585HE made on a Stiller bolt action for guy in Canada.

It was made for the poster Spooksar on Africa Hunting and Accuratereloading,

by Corlanes/Rocky Mountain rifles, in Dawson Creek BC Canada, with a

Stiller action, Timney trigger. the stock is a blue/grey laminate. He imported

the barrel, cases, dies, etc.. from us, through Prophet River in Lloydminster AB.


Image



That action similar to Lawton we had and neighbor got, that won the King Of The

2 Mile shoot at Whittington, with the 375 Lethal cartridge the neighbor made,

from our 585 brass. Made it full length case,.. It is big one on the right.

He made an 18 lb gun with McMillan target stock, a huge scope, tripod..

Nice thing is we don't need BMG action.ED


Image

Post Reply