Indians For Guns

Please answer I have percihole nx100 club elite, but now I want to change its spring with powerful Nx100 series for increasing its power can I change?

pkransubhe wrote:Please answer I have percihole nx100 club elite, but now I want to change its spring with powerful Nx100 series for increasing its power can I change?

Depends on the dimensions of the powerplant i.e. the cylinder of the two airguns. If they are identical, you should be able to swap between the two, if not then you are out of luck.

If I were you, I'd simply keep this one as it is and buy the other one as well

You seem to be in luck, BTW!
The powerplants are the same. You can swap this Club spring with the standard 40 rings (38active coils) one from Precihole, or any other aftrrmarket spring . Just be sure to only get one whose OD in standard length does not exceed ~19mm....and does not get coil bound at anything more than ~ 120mm, and you are good to go.
Good luck!

Added in 4 minutes 48 seconds:
That is, if you swap the gas ram with a coil spring.
As for deploying the NX100 Polaris gas ram, it's a simple swap job.

Yours NX club elite has a nitro piston, not a spring. As you want to have a more powerful nitropiston, than the exting one, then go for a nx nitropiston unit having 60bar pressure. The preciholesports site's store section have nitro pistons of 40bar and 60 bar versions. If you want to put a better spring to get the same power as that of the 60bar nitro piston, then you can put a model 27 Gsmith spring. But for that you have to buy a regular piston, top hat and spring guide from precihole. Regards

Hey guys,
Here i have a thinking on my px100 achilles about changing the barrel with club pro barrel .
So, if i changed the barrel, what you people say whether it would becone more accurate, long range or any other results?
If it is pissible to change, would you recommend for better performance?
Thanks in advance

Sent from my SM-A700FD using Tapatalk

I think the barrel OD of Achilles and Club Pro are different

Hi

Added in 21 minutes 52 seconds:

GNV wrote:I think the barrel OD of Achilles and Club Pro are different

Hi GNV
I wanna ask u something again & I hope U ll share it as soon as possible

Have u ever tried the (attached below) new batches of jsb heavy which r available in airgunindia, is it matching for px100 achilles or its different from the old batch
Recently Ive bought some pellets jsb heavy 10.34 from airgunindia but I can't try in my Achilles becoz Im out of station


Sent from my ASUS_Z00LD using Tapatalk

GNV wrote:I think the barrel OD of Achilles and Club Pro are different

Hi GNV
I wanna ask u something again & I hope U ll share it as soon as possible

Have u ever tried the (attached below) new batches of jsb heavy which r available in airgunindia, is it matching for px100 achilles or its different from the old batch
Recently Ive bought some pellets jsb heavy 10.34 from airgunindia but I can't try in my Achilles becoz Im out of station


Sent from my ASUS_Z00LD using Tapatalk

Can i have basu sir and gnv's watsapp no
I want to ask some questions

vast wrote:Hi

Added in 21 minutes 52 seconds:

GNV wrote:I think the barrel OD of Achilles and Club Pro are different

Hi GNV
I wanna ask u something again & I hope U ll share it as soon as possible

Have u ever tried the (attached below) new batches of jsb heavy which r available in airgunindia, is it matching for px100 achilles or its different from the old batch
Recently Ive bought some pellets jsb heavy 10.34 from airgunindia but I can't try in my Achilles becoz Im out of station


Sent from my ASUS_Z00LD using Tapatalk

Just now saw your above post.
I am using these pellets ONLY in mu Achilles and the performance is same as the old ones. JSB only changed the marking on the tin from CZ to M 47/08 to comply with their local laws. Even though the pellets seems to be a little harder than the old ones the performance is same and less number of damaged pellets in a tin.

GNV

hi fellow ifgians i recently ordered the precihole px100 achilles which will arrive in few days but now I'm facing a issue i bought a fx 4 stage hand pump few years back from relishsports which doesn't came along a hose connector like other handpumps do i use to connect my steyr lp10 air cylinder directly to hand pump by an adapter and as far as i know px100's air tank is not detachable so will i be able to fill it without the hose if anyone know where to buy one kindly do share it will be really helpful thanks in advance

There are many online shops which sell pump accessories like
airgunindia.com,
pcpshop.in

thanks a lot gnv i will look there airgunindia.com do have one but its for hill pumps thats why i was confuse about its compatibility with fx

Looks like Precihole have finally decided to launch PCP pumps.
They have just announced on their facebook pagethat it will be available soon.
They haven't mentioned the price/launch date though.
My guess around 10k.

Sent from my SM-A500G using Tapatalk

Hi Everyone,
I just bought a PX100 Club Pro. The accuracy is great. Sharing a picture after taking 10 shots from a distance of 10+ meters in a prone position. Now I am not a marksman or a champion shooter. So please it with a pinch of salt.