CISCO AIR GUNS

All posts related to air-guns (air-rifles, airsoft, air-pistols, air-guns etc.).
Post Reply
suraj2087
On the way to nirvana
On the way to nirvana
Posts: 94
Joined: Thu Jul 22, 2010 9:53 am
Location: Faridabad

CISCO AIR GUNS

Post by suraj2087 » Thu Aug 26, 2010 8:13 pm

Dear Friends,

Can you provide me the contact details of CISCO AIR GUNS . . .

Regards

Suraj.

For Advertising mail webmaster
hotsteper
Fresh on the boat
Fresh on the boat
Posts: 1
Joined: Tue Apr 10, 2007 1:14 pm
Location: faridabad

Re: CISCO AIR GUNS

Post by hotsteper » Sat Jun 08, 2013 8:36 pm

Hi Suraj,

Although its been long since u asked but I happened to see your post and the information simultaneously while I was searching the same, its as below:

Sisco Air Guns
Location
Supreme Iron & Steel Co. , Pathankot 145001

Contact Info
Phone 098 76 877788
Email [email protected]

Hope its still relevant to you and our fellow ifgns

Regards

User avatar
Basu
Veteran
Veteran
Posts: 1483
Joined: Wed Apr 08, 2009 7:14 pm
Location: Salt Lake Kolkata

Re: CISCO AIR GUNS

Post by Basu » Mon Jul 08, 2013 8:42 pm

I understand that it comes in smooth bore yet very accurate.
Any body may please enlighten me.

Basu
Not all those wander , are lost...............

User avatar
Basu
Veteran
Veteran
Posts: 1483
Joined: Wed Apr 08, 2009 7:14 pm
Location: Salt Lake Kolkata

Re: CISCO AIR GUNS

Post by Basu » Tue Jul 30, 2013 11:19 am

It is understood that SISCO makes smooth bore air rifles only.
At present they do not have any dealer in kolkata.
Any one who has the said rifle , may please post his view as it is an old house and there is hardly any post about it.

Basu
Not all those wander , are lost...............

thunderbird1
Learning the ropes
Learning the ropes
Posts: 19
Joined: Mon Aug 05, 2013 1:41 pm

Re: CISCO AIR GUNS

Post by thunderbird1 » Tue Aug 13, 2013 6:32 pm

Hi Basu
My friend owns one Model-47 gun from SISCO ( in 0.22 cal.). I found it rather inaccurate and powerless. Today I stripped it , changed the bucket washer and tried with out much improvement. Since I suspected that the transfer port is very small ( 2 mm) I enlarged it to 3.2 mm and found the performance improved considerably. Still I will not recommend this particular model to anyone.

Post Reply