Revolver 0.32 (7.65 mm x 23)

Posts related to handguns (pistols, revolvers)
Post Reply
User avatar
Pranab7
Learning the ropes
Learning the ropes
Posts: 27
Joined: Thu Mar 17, 2011 2:03 pm
Location: Rewari, Haryana, India

Revolver 0.32 (7.65 mm x 23)

Post by Pranab7 » Thu Apr 07, 2011 8:54 pm

I want to know what dose 7.65 x 23 means.
And I converted the length of the revolver as mentioned in the official web site of IFO, to Inch and it figured out to be 7 inch, dose that mean right from the butt end till the barrel end?
Another quarry of my is - do we have to show the empty shells or even unused bullets to the shop keeper while purchasing for next round of allowed quantity.
Thanks & Regards
Pranab

For Advertising mail webmaster
cottage cheese
Veteran
Veteran
Posts: 1425
Joined: Thu Dec 07, 2006 10:15 am
Location: Shillong-Dimapur

Re: Revolver 0.32 (7.65 mm x 23)

Post by cottage cheese » Thu Apr 07, 2011 9:06 pm

7.65mm is the diameter of the bullet, 23 is the length of the cartridge (Casing only)

If they say Length of the revolver, they mean its length in its entirety inclusive of the barrel. The length of the barrel will probably be listed separately.

Lots of nonsense going around about showing empties to shopkeepers... apparently some states/districts have this procedure in effect. Most seem to have ignored it because of the futility of the exercise.


regards,
cc
He who can not think, is a fool; he who will not, a bigot; he who dare not - a slave!

TwoRivers
Veteran
Veteran
Posts: 1526
Joined: Tue Feb 26, 2008 1:11 pm
Location: Fairbanks, Alaska

Re: Revolver 0.32 (7.65 mm x 23)

Post by TwoRivers » Thu Apr 07, 2011 10:39 pm

[quote="cottage cheese"]7.65mm is the diameter of the bullet, 23 is the length of the cartridge (Casing only)

"7.65 mm", in this instance, is actually the diameter of the bore, not of the bullet. The "nominal" caliber designation may be bore, groove, actual bullet, or neither.

cottage cheese
Veteran
Veteran
Posts: 1425
Joined: Thu Dec 07, 2006 10:15 am
Location: Shillong-Dimapur

Re: Revolver 0.32 (7.65 mm x 23)

Post by cottage cheese » Fri Apr 08, 2011 5:21 pm

...oopsy!! How could I have over looked that! :mrgreen: Senior moment there TR. :mrgreen:

Apologies Pranab for the less that perfect information.

regards
cc
He who can not think, is a fool; he who will not, a bigot; he who dare not - a slave!

Post Reply