New made in india pistol of .32 calibre by AHT called stallion is out in the market.
-
- Fresh on the boat
- Posts: 8
- Joined: Fri Dec 08, 2023 3:44 pm
New made in india pistol of .32 calibre by AHT called stallion is out in the market.
But it has the same problems as all the other made in india pistols, i.e., questionable reliability, availability. Dealers are trying to sell it around 3 lakhs. I have a fresh arms licence and I'm really confused so as to which weapon to buy for concealed carry in 32 bore. Not looking for revolvers as pistols can hold larger capacity. Should I go for the newly launched stallion or just go for iof pistols?
I have a permit to buy from outside the state (as my licence is valid in only H.P.) till feb 15. Please suggest.
I have a permit to buy from outside the state (as my licence is valid in only H.P.) till feb 15. Please suggest.
-
- Learning the ropes
- Posts: 28
- Joined: Tue May 18, 2010 11:09 pm
- Location: india
Re: New made in india pistol of .32 calibre by AHT called stallion is out in the market.
Stallion pistol has striking similarity to Beretta 81/82 .32 pistol but looks wise is excellent no doubt. Will request members to post review of its working and handling, accuracy.
-
- Fresh on the boat
- Posts: 8
- Joined: Fri Dec 08, 2023 3:44 pm
Re: New made in india pistol of .32 calibre by AHT called stallion is out in the market.
That would be wonderful, thanks so much.
-
- On the way to nirvana
- Posts: 85
- Joined: Mon Nov 06, 2017 11:47 pm
Re: New made in india pistol of .32 calibre by AHT called stallion is out in the market.
Urgen Negi wrote: ↑Tue Jan 23, 2024 6:14 pmBut it has the same problems as all the other made in india pistols, i.e., questionable reliability, availability. Dealers are trying to sell it around 3 lakhs. I have a fresh arms licence and I'm really confused so as to which weapon to buy for concealed carry in 32 bore. Not looking for revolvers as pistols can hold larger capacity. Should I go for the newly launched stallion or just go for iof pistols?
I have a permit to buy from outside the state (as my licence is valid in only H.P.) till feb 15. Please suggest.
sir i am also planing to by the same, because i have no choice, i have search alot, alot but result is zero, vinveli, glock, verywin, JDTaurus, Grand power,
all are only giving the time, i reached maximum PP increase time, Webley and MSD are very bulky and weighted
-
- On the way to nirvana
- Posts: 74
- Joined: Wed Dec 20, 2017 10:37 pm
Re: New made in india pistol of .32 calibre by AHT called stallion is out in the market.
i will suggest just cover the license with a used revolver iof.let these products have some user reviews ,as i personally find the good looking but performance unknown.so better to wait and watch.
-
- Learning the ropes
- Posts: 17
- Joined: Mon Mar 21, 2016 10:34 pm
- Location: Gujarat
Re: New made in india pistol of .32 calibre by AHT called stallion is out in the market.
As a beginner I would suggest you opt for Revolver as your first weapon rather than pistol. It is easy to handle, easy to clean and easy to dismantle and reassemble compared to pistol (too many moving parts). But if you are set on pistol go for easily available calibers like 0.32 or even 0.22 if you can find a import for sale. Imported ammo prices have skyrocketed in India.Urgen Negi wrote: ↑Tue Jan 23, 2024 6:14 pmBut it has the same problems as all the other made in india pistols, i.e., questionable reliability, availability. Dealers are trying to sell it around 3 lakhs. I have a fresh arms licence and I'm really confused so as to which weapon to buy for concealed carry in 32 bore. Not looking for revolvers as pistols can hold larger capacity. Should I go for the newly launched stallion or just go for iof pistols?
I have a permit to buy from outside the state (as my licence is valid in only H.P.) till feb 15. Please suggest.
Might I suggest Webley fox or Astr Atal.
-
- Fresh on the boat
- Posts: 8
- Joined: Fri Dec 08, 2023 3:44 pm
Re: New made in india pistol of .32 calibre by AHT called stallion is out in the market.
I'm confused between atal and stallion pistols. Gun dealers have different opinions. Atal was my first choice, but the gun dealers gave negative reviews but none of them had the pistol available.
-
- Fresh on the boat
- Posts: 8
- Joined: Fri Dec 08, 2023 3:44 pm
Re: New made in india pistol of .32 calibre by AHT called stallion is out in the market.
I finally booked the stallion pistol, because of the fit and finish, light weight of the pistol and 3 years warranty given by the manufacturer which can be extended to additional 2 years. The dealer shall deliver it by 12th of March. Hopefully I made a good purchase. Kindly share your views and suggestions.
Thanks.
Thanks.
-
- Learning the ropes
- Posts: 28
- Joined: Tue May 18, 2010 11:09 pm
- Location: india
Re: New made in india pistol of .32 calibre by AHT called stallion is out in the market.
In terms of calibre .32 makes sense in india as it's ammunition is one of the most widely available and reasonably priced compared to .45 or .30 pistols. Pistol looks good on spec sheet pls post a review when you catch hold of it.
-
- Almost at nirvana
- Posts: 186
- Joined: Mon Feb 09, 2015 10:42 am
- Location: New Delhi
Re: New made in india pistol of .32 calibre by AHT called stallion is out in the market.
It's a very neat looking pistol, congratulations. My only issue with the Stallion is that I understand it's made of high grade Aluminium , how good it is , is it going to hold up over the years ?
The Company is very confident it is.
If the usage is less I guess you have nothing to worry and wish you well.
The Company is very confident it is.
If the usage is less I guess you have nothing to worry and wish you well.
"One can never know how far he can go and reach, until he starts running "
- dada_yuvraj_13
- On the way to nirvana
- Posts: 70
- Joined: Sat Nov 06, 2021 10:10 pm
- Location: Bilaspur
- Contact:
Re: New made in india pistol of .32 calibre by AHT called stallion is out in the market.
You do not have the required permissions to view the files attached to this post.
Best Wishes & Regards
Rajkumar Yuvraj Singh Dada (जाज्वल्य,छत्तीसगढ़)
Rajkumar Yuvraj Singh Dada (जाज्वल्य,छत्तीसगढ़)
-
- Fresh on the boat
- Posts: 8
- Joined: Fri Dec 08, 2023 3:44 pm
Re: New made in india pistol of .32 calibre by AHT called stallion is out in the market.
Thanks everyone for your wishes. I'm pretty excited, I will post a review as soon as I get it delivered and after firing.
As one gentleman suggested, only the frame is made of high grade aluminium and the slide and barrel materials are made out of chromium molybdenum steel (carbon steel). And my usage is also not going to be much. Thanks for the suggestions I'm open to more suggestions.
Regards.
As one gentleman suggested, only the frame is made of high grade aluminium and the slide and barrel materials are made out of chromium molybdenum steel (carbon steel). And my usage is also not going to be much. Thanks for the suggestions I'm open to more suggestions.
Regards.
- timmy
- Old Timer
- Posts: 3010
- Joined: Mon Dec 08, 2008 7:03 am
- Location: home on the range
Re: New made in india pistol of .32 calibre by AHT called stallion is out in the market.
Urgen Negi: a new pistol is always a fun acquisition -- we hope that you will enjoy yours!
Regarding aluminum and polymer framed pistols, I don't see a downside to them if they are made well and used for what one buys them for.
Using a serviceable grade of aluminum for the frame can offer a useful trade-off between durability and weight. This is especially true if the grooves for the slide are provided with steel bearing inserts. Also, anodized aluminum can be VERY hard!
Regarding polymer, steel bearing surfaces are pretty much required, and they too can offer a reasonable weapon.
I think that these observations especially apply when one considers the ammunition limitations that are imposed upon shooters. Just how many rounds are actually going to be fired through a gun in 10, 20, or 30 years? This is also a valid consideration.
So, a lot of this boils down to what one wants a gun for, and how well it is made. Please don't forget to share your shooting experiences with us after you are able to try your new gun out at the range.
Regarding aluminum and polymer framed pistols, I don't see a downside to them if they are made well and used for what one buys them for.
Using a serviceable grade of aluminum for the frame can offer a useful trade-off between durability and weight. This is especially true if the grooves for the slide are provided with steel bearing inserts. Also, anodized aluminum can be VERY hard!
Regarding polymer, steel bearing surfaces are pretty much required, and they too can offer a reasonable weapon.
I think that these observations especially apply when one considers the ammunition limitations that are imposed upon shooters. Just how many rounds are actually going to be fired through a gun in 10, 20, or 30 years? This is also a valid consideration.
So, a lot of this boils down to what one wants a gun for, and how well it is made. Please don't forget to share your shooting experiences with us after you are able to try your new gun out at the range.
“Fanaticism consists of redoubling your efforts when you have forgotten your aim.”
saying in the British Royal Navy
saying in the British Royal Navy
-
- On the way to nirvana
- Posts: 85
- Joined: Mon Nov 06, 2017 11:47 pm
Re: New made in india pistol of .32 calibre by AHT called stallion is out in the market.
nice suggestion sirtimmy wrote: ↑Sun Feb 11, 2024 4:19 amUrgen Negi: a new pistol is always a fun acquisition -- we hope that you will enjoy yours!
Regarding aluminum and polymer framed pistols, I don't see a downside to them if they are made well and used for what one buys them for.
Using a serviceable grade of aluminum for the frame can offer a useful trade-off between durability and weight. This is especially true if the grooves for the slide are provided with steel bearing inserts. Also, anodized aluminum can be VERY hard!
Regarding polymer, steel bearing surfaces are pretty much required, and they too can offer a reasonable weapon.
I think that these observations especially apply when one considers the ammunition limitations that are imposed upon shooters. Just how many rounds are actually going to be fired through a gun in 10, 20, or 30 years? This is also a valid consideration.
So, a lot of this boils down to what one wants a gun for, and how well it is made. Please don't forget to share your shooting experiences with us after you are able to try your new gun out at the range.
-
- One of Us (Nirvana)
- Posts: 421
- Joined: Sat Aug 28, 2010 3:03 pm
Re: New made in india pistol of .32 calibre by AHT called stallion is out in the market.
Mr.Negi, Please post technical , price , warranty and test details of the Pistol as soon as you acquire it. Use different brands of ammo and stock the most economical brand.
Jai Hind.
Jai Hind.