Permission for modification of 0.32 pistol

Posts related to handguns (pistols, revolvers)
Post Reply
pistolprince007
Learning the ropes
Learning the ropes
Posts: 28
Joined: Tue Nov 21, 2017 1:07 pm

Permission for modification of 0.32 pistol

Post by pistolprince007 » Tue Jul 31, 2018 12:15 am

Do I need to take permission to do modification of my .32 pistol from the licensing authority ?
Or any gun dealer can do it ?

For Advertising mail webmaster
User avatar
Vineet
Veteran
Veteran
Posts: 1383
Joined: Fri Jul 11, 2008 11:09 am
Location: Punjab

Re: Permission for modification of 0.32 pistol

Post by Vineet » Fri Aug 03, 2018 10:54 pm

What kind of modification you want to get done?

Rebluing, grips change, sights change are ok.

You are not allowed to play with serial no. and other markings.
Vineet Armoury
Arms, Ammunition & Accessories.

nitroex700
Almost at nirvana
Almost at nirvana
Posts: 226
Joined: Tue Jul 19, 2016 3:49 pm

Re: Permission for modification of 0.32 pistol

Post by nitroex700 » Sat Aug 04, 2018 5:43 pm

Vineet wrote:What kind of modification you want to get done?

Rebluing, grips change, sights change are ok.

You are not allowed to play with serial no. and other markings.
No modification to the barrel, caliber conversion, fire rate change etc. is allowed in particular. Suppressors, muzzle breaks etc. are also in the gray area as far as I know.

pistolprince007
Learning the ropes
Learning the ropes
Posts: 28
Joined: Tue Nov 21, 2017 1:07 pm

Re: Permission for modification of 0.32 pistol

Post by pistolprince007 » Mon Aug 06, 2018 10:19 am

Vineet wrote:What kind of modification you want to get done?

Rebluing, grips change, sights change are ok.

You are not allowed to play with serial no. and other markings.
I want this type of modification as shown in the picture
You do not have the required permissions to view the files attached to this post.

nikkiboy12
Fresh on the boat
Fresh on the boat
Posts: 1
Joined: Fri Jul 05, 2019 8:40 am

Re: Permission for modification of 0.32 pistol

Post by nikkiboy12 » Sat Jul 06, 2019 8:52 pm

Hello,
With due Respect to every member... The above shown modifications as seen are common...I have got it done from a known gunsmith in Meerut... Exposed Hammer, Push Button magazine release, Ventilated rail on slide, blueing, grip change etc... After this modification recently my license was due for renewal... As i was asked i visited the authorities with the fire arm ... They haven't raised any objection... So As far in my knowledge these things are not objectionable... Rest i leave with the fine sense of knowledge of the members here of this esteemed forum... Regards
You do not have the required permissions to view the files attached to this post.

Post Reply