585 HE -- Cases In Production --

Posts related to rifles.
Post Reply
hubel585
Almost at nirvana
Almost at nirvana
Posts: 205
Joined: Mon Oct 03, 2011 2:08 pm

Re: 585 HE -- Cases In Production --

Post by hubel585 » Sun Jul 13, 2014 11:55 am

We've put some of the 585HE bolt guns in composite and Hogue
stocks, and they are rugged for extreme weather. And they
don't break under heavy loads. Prices are nice and they have
aluminum pillars and/or aluminum bedding blocks.
And with their hollow butts very easy to add weight to take up
recoil. If lead and epoxy added to a complete fill of the hollow,
too much weight, so I found a nice cheap substitute.
We now using rubber coated mouse balls that we have bunch of.
They are steel with rubber coating, and the right weight.
They add just the right weight and and wedge in good.
And won't rattle with coating, and we hold them in tight with
a piece of dense foam under butt pad.

Image

We get asked about how much speed potential we have. And
we start by mentioning cases can hold 190-200 gr of ball powder
with the bullets loaded out longer. And we have those heavy
powder loads with 650 gr jacketed bullets, in the Enfield
pictured I use as one of my test guns.

Image

And more fun shooting, using a pistol grip on one of the
585HE falling block test guns. Real heavy loads try to spin us
around like a weathervane.. Ed

Image

For Advertising mail webmaster
hubel585
Almost at nirvana
Almost at nirvana
Posts: 205
Joined: Mon Oct 03, 2011 2:08 pm

Re: 585 HE -- Cases In Production --

Post by hubel585 » Wed Aug 06, 2014 12:26 pm

A related case to our 585 is the 24ga FH that has 3" chamber and
brass cases reworked 577NE cases, that we reduce the rim down
to .720"... the 24ga size rim...We make minimum chamber so that 24ga
plastic cases, 2.5" long just fit. And min chamber cuts down on a lot
of brass case expansion, which the wears cases out.

The barrels are same bore barrels as our 585 and the hollowbase minie
bullets work great in it, the ones that are .585", 440gr to 540gr.
Makes hairy 24ga gun for deer, etc. Be useful in shotgun only areas.
Guys on GB sells the .585" minies. And the brass cases, we don't have
to wait for them to be made.

Image

Here is what 585HE barrel and its monoblock look like before
screwing the barrel in.This one was 585HE, but process same if
monoblocking in 24ga FH...Ed

Image

User avatar
ckkalyan
Veteran
Veteran
Posts: 1484
Joined: Sat May 29, 2010 10:37 pm
Location: British Columbia, Canada
Contact:

Re: 585 HE -- Cases In Production --

Post by ckkalyan » Wed Aug 06, 2014 2:07 pm

:shock: Amazing work and detailed, report hubel585 - many thanks for sharing! :cheers:
When guns are outlawed, only outlaws will have guns!

hubel585
Almost at nirvana
Almost at nirvana
Posts: 205
Joined: Mon Oct 03, 2011 2:08 pm

Re: 585 HE -- Cases In Production --

Post by hubel585 » Fri Aug 22, 2014 11:54 am

Here is picture of 585HE with 24ga FH ...585 the longer one.
Both use same bullets/slugs, same caliber rifled barrels.
Different easy usages, 24ga FH is an easy setup in break
actions and 585HE in bolt actions and falling blocks.

Image

Picture of non-discarding 585/24ga sabot cup I found that holds
458 bullets and slugs tight. It had hammerhead type slug in it that
someone pulled out, and they wouldn't stay in tight after pulled.
Supposed to be for 20ga, But this sabot was a real loose fit
in 20ga, though made for 20ga, so I shrunk diameter of bottom rib,
fits perfect, super tight, in 24ga and 585HE brass cases. A press
in tight fit gives good resistance for good ignition. real tight fit.

Image

Here is a 24ga/585 discarding sabot that holds .452" 45cal pistol
bullets. Made by Hornady for 58cal Muzzle loaders..
With 250 gr bullet in 585HE, hopped up load will go about mach 4.

Image

For ease of getting actions in stocks, I like composites.They are
strong. come colors, many can be painted with tough finish paints.
Usually need weight added for big bore use. But not too miuch..
An easy way to weight plastic stocks with hollow butts, use rubber
coated computer mouse balls, weight comes out perfect, without being
too heavy if using that much lead. And coating keeps them quiet, and
we hold them in, with piece dense foam under butt pad....Ed

Image

hubel585
Almost at nirvana
Almost at nirvana
Posts: 205
Joined: Mon Oct 03, 2011 2:08 pm

Re: 585 HE -- Cases In Production --

Post by hubel585 » Wed Sep 10, 2014 8:16 am

First AUS buffalo killed by 585HE. By Tankhunter with his Ruger #1.

If you use closeup on picture, you see loaded round on the buffs hide

next to the 585HE Ruger #1.... A nice heavy barreled gun..Ed

Image


I put the 585 in a Savage 112, lots of room lengthwise, figuring out an
extractor is a problem, but then got a look at the savage 212, the 12 ga
one with big diameter bolt and locking lugs. Its locking lugs are bigger
than the lugs in a big PH bolt action. So one day will do one
on a Savage 212, and adjusting extractor to fit no problem...Ed

Image

hubel585
Almost at nirvana
Almost at nirvana
Posts: 205
Joined: Mon Oct 03, 2011 2:08 pm

Re: 585 HE -- Cases In Production --

Post by hubel585 » Sun Sep 28, 2014 1:23 pm

Here is picture of 100 cases loaded with CEB solid nose bullets
and hollowpoints. This bullet is a turned solid with wide meplat
or wide hollowpoint. .

Image

Here is pic of a Enfield with a jeweled and polished bolt, going
to be 585HE. In the back, Bolt jeweling and polishing done by the
great craftsmen, Bob Snapp, years ago.

Image

Picture comparing unfired and fired cases showing our tough cases
One on the left fired with 650gr at 2400 and base above belt
didn't hardly expand, Sized the top and reloaded/shot again.
And AHC will make guns now with our 585HE for any wanting
super top quality guns.They have some cases to give to guys
as a sample to show guys the case. Ed

Image

hubel585
Almost at nirvana
Almost at nirvana
Posts: 205
Joined: Mon Oct 03, 2011 2:08 pm

Re: 585 HE -- Cases In Production --

Post by hubel585 » Wed Oct 15, 2014 5:16 pm

Our 585 caliber is modern bolt action continuance of the 577 Nitro
Express rimmed case, that many big game hunters like. Usually
set up in double rifles. It has an interesting history, from the old 24ga
size to 577NE, to the 585 Nyati with the picture of Ross Seyfreid
shooting one in a Ruger #1 under recoil knocking his shooting glasses
off, to the Trex of internet fame knocking guys over,
to our 585HE the strongest yet.

The 577NE is an offshoot of the 24 gauge caliber, only they went
eventially to brass cases. Back in the 1860-70s, starting first with short
cases and black powder, cases built like shotgun cases, called the
577 Snider, then going to coiled brass cases, still with black powder,
then on to drawn brass cases, called 577 BP Express. then to 3"
and other longer cases with smokeless. The Snider started out with a bullet
of .570" diameter and through the progression to the 577NE bullet
diameter ended up at .585". This general bore diameter of cartridge guns
and muzzle loaders, it is really interesting on how they developed
and were used by military and then hunters over the years. The Snider
was necked down to make the 577-450 , a military round used all
over the British Empire, by the tens of millions.

Bases of both 24ga and 577NE are about the same. Now we have made a
24ga FH, a slight regression to earlier times, by taking 577NE brass, and
reducing rim diameter to 24ga specs. Two minute job. And
stamp the caseheads 24 ga.

For shotgun upgrading in power and range, It is all about increasing
the power in easy to find brass cases, stronger actions, and finding
reasonable price rifled barrels. Same barrels we found for 585, work for 24ga.
The 577NE brass we make 24ga drawn cases from, for example are
about a third the cost of 600NE brass, or getting turned 24ga cases made.
We could use 24ga thin cases but they are a pain, expand way too much,
with slug loads which makes resizing without crumpling cases a problem.

Info about the power in types of guns normally set up with 24ga FH,
break actions, bolt shotguns,etc. In thin brass 24ga case, 440gr slug
goes 1500, with about 2000 ft lbs, that's in a 2.5" Magtech brass case.
Now using the better, heavier 3" brass we got, we can increase speed
to 1750 fps increasing energy 50%, going to 2000 fps about doubles
energy. And going to 2300 which good brass holds ok, in heavy barrel
gun, gets us near 2 1/2 times the energy. About 37-40,000 psi which the
actions hold in this smaller diameter case, compared to 12 gauge size.
So makes relatively smaller bore shotgun, 24ga, with 458WIN power.
.Perfect with Minie bullets. Perfect for deer and hogs, bear, etc.

Great for slug hunting in shotgun only areas. We mark barrels 24ga
and cases 24. A decent case that is complimentary to our 585HE....Ed

hubel585
Almost at nirvana
Almost at nirvana
Posts: 205
Joined: Mon Oct 03, 2011 2:08 pm

Re: 585 HE -- Cases In Production --

Post by hubel585 » Wed Nov 05, 2014 5:51 pm

Here is a different look at 585 sabots holding 458cal bullets.
Sabots hold leafd as well as jacketed.

Image

Here is a long turned streamlined bullet in our 585.

Image


Anyone wanting to import barrels, actions, cases, etc into Canada from
here can work through Prophet River Firearms in Lloydminster, AB.

The here being the US, as well as our group with barrels, dies, cases,
and McGowen with .585 barrels in stock, CH4D with 585HE dies
in stock, gunshops with # 31 shellholders.
And later few retail outlets setup with cases in stock... . Ed

hubel585
Almost at nirvana
Almost at nirvana
Posts: 205
Joined: Mon Oct 03, 2011 2:08 pm

Re: 585 HE -- Cases In Production --

Post by hubel585 » Sun Dec 14, 2014 1:29 pm

Another application for our 585 HE is for guys with the 14.5mm
PTRDs, to use our case with chamber insert. In many places 14.5
cases are scarce, real expensive, as well as most 14.5mm cases
being steel are not the easiest to resize/reload. Our case sizes
like regular cases and can be easily reloaded many times.

And in a PTRD with almost a 5 foot long barrel can get 650gr
spitzer bullet to the same speed the 14.5mm gets a 900 gr using
3 times as much powder. 3300 fps. Or get a 900gr at 2800.
Great possibilities for fun shooting. And tactical use in a place
where it would be useful to reload in the operations field, where
steel cases are scarce. A 100 cases do over 2000 reloads.

Image

I like Enfields to put our 585HEs in, for reasonable cost guns. .
Here is inexpensive way to fancy up the Enfield Bolt handle by
cutting the dogleg part of the old handle off and welding on
inexpensive contoured handles I found, one of which is like
Ruger 77 handle, one on the right . Something even a novice
like me can do.....

Image

A lot of guys are crazy about CEB bullets. Here are light 450gr
ones in our 24ga FH. The hollowpoint can range in weight 450gr
to 700gr.. The 24ga FH is nice complement to our
585HE for the shotgun only deer hunters... Ed

Image

hubel585
Almost at nirvana
Almost at nirvana
Posts: 205
Joined: Mon Oct 03, 2011 2:08 pm

Re: 585 HE -- Cases In Production --

Post by hubel585 » Thu Jan 01, 2015 6:37 am

For lightweight plinking, deer hunting, etc, in 585HE as well as 24ga FH
here is picture of 58cal Hornady sabot that holds .451/.452" light
bullets 225 to 300 gr. A way to shoot targets economically. Low recoil
but a big bang and satisfaction. That sabot is one made for ML, but
with .452" bullet in it is a real tight fit in brass cases, to stay
in place and give good ignition. A 250 gr bullet would go about
mach 4 with a top load..

Image

Here is what 585 bull barrel, target blank looks like, 1 5/8" OD and 32" long.
It'll go in heavy action of some kind. 4th one from the left. The one in yellow
sleave on top, is a heavy contoured one with muzzle of .980" ..The 5th, 6th,
7th blanks on bottom are straight 1.375" 585 regular twist blanks.
One in paper wrapper is slow twist 585 barrel...Ed

Image

hubel585
Almost at nirvana
Almost at nirvana
Posts: 205
Joined: Mon Oct 03, 2011 2:08 pm

Re: 585 HE -- Cases In Production --

Post by hubel585 » Wed Jan 28, 2015 1:30 am

Here is picture, nice cast bullet I like for the 585HE and 24ga FH.
It is .585" diameter and 650 gr and these particular ones are a
hard lead alloy, plus they've been heatreated. They are about as
hard as copper jacketed softs. These have a flat base, and
fairly streamlined..

Image

But to penetrate good and do great damage to game or target they
can be soft lead and hollowbase like Minie Bullets. Here is picture
of timber drilled through with .585 soft lead Minie from 585HE.
Picture is the back of 6x6 timbers where Minie bullets came out. Ed

Image

hubel585
Almost at nirvana
Almost at nirvana
Posts: 205
Joined: Mon Oct 03, 2011 2:08 pm

Re: 585 HE -- Cases In Production --

Post by hubel585 » Sat Feb 14, 2015 4:52 am

In Canada there are 3 guys there now setting up 585HEs,
and one setting up 24ga FH. Another friend setting up a 585HE
handed out a bunch of cases and info sheets at the SCI convention.
We are getting some more reamers made. Some more dies sent
here. Another pallet load of cases coming.

Here is picture of a light spitzer bullet in the 24ga FH case,
will work in 585 also. Good for hunting and medium range
target work.

Image

Here is picture of 585HE we did in the FBW with regular two
piece stock.We put a tenon on the forearm to wedge into the
front of the action below the barrel and a tight barrel band
on the front. Ed

Image

hubel585
Almost at nirvana
Almost at nirvana
Posts: 205
Joined: Mon Oct 03, 2011 2:08 pm

Re: 585 HE -- Cases In Production --

Post by hubel585 » Mon Mar 02, 2015 3:34 pm

Here is comparison of our 585HE and Trex case, and while
we have barrels of cases and more coming and many available
in stock in AUS, many are finding Trex cases scarce...

Image

Here is picture of a neat falling block that could work for our
585HE with little work, the Wickcliff.


Image

Here is picture of the singlestack mag box we built for Enfields
fitted to the bottom of BBK action.Very little changing and
it fits a lot of different actions, as a fixed magazine, with its
own feed lips,and we load from the top.Ed

Image

hubel585
Almost at nirvana
Almost at nirvana
Posts: 205
Joined: Mon Oct 03, 2011 2:08 pm

Re: 585 HE -- Cases In Production --

Post by hubel585 » Wed Mar 25, 2015 3:18 pm

Here is picture of a 585HE we did in a Mauser 98 as a
singleshot test gun. We used a composite stock we
adapted to fit action. Weighted to 12 lbs.
Enfield in back, you can see it is longer.

Image

And speaking of singleshots a fellow in the Yukon is
just finishing up one in a Ruger #1.

Here is one reason to like 585 calibers is bullet varieties,
this picture is only about half the bullets and slugs
we know of, and most can easily found. Ed

Image

hubel585
Almost at nirvana
Almost at nirvana
Posts: 205
Joined: Mon Oct 03, 2011 2:08 pm

Re: 585 HE -- Cases In Production --

Post by hubel585 » Tue Apr 21, 2015 6:49 pm

There is couple 585 videos on Swann Gunsmithing's Facebook site;

Of our 585HE in first Ruger #1, that was done in Australia.It was set up

for the poster Tankhunter on the AR big bore forums. That gun killed the

first AUS buff, killed by a 585HE, that I posted picture of above. You can

go direct to the page and click on the videos to watch the test firings..

https://www.facebook.com/swanbarrels/videos


Here is picture our 585HE in a Montana PH action in a MPI stock, with the

style of a CZ stock, that a guy is setting up. The stock will be finished brown

and metal finished with a Gun Kote finish...Ed

Image

Post Reply