DIY Re-polishing my 30-06 Rifle at home in a few hundred rupees
- Ajaaybeer
- Almost at nirvana
- Posts: 132
- Joined: Wed Jan 10, 2018 11:45 pm
- Contact:
DIY Re-polishing my 30-06 Rifle at home in a few hundred rupees
Greetings to fellows and respect to veterans, I am sharing a little diy project which I carried out without any professional tools to refinish and repolish my I.O.F .30-06 rifle stock at home. Literally it’s a very economical project carried out in a few hundred rupees.
Disclaimer: There are fellow members who are at expert level and they may rate it at level 1 or 2 on scale of 1 to 10 if we compare it to some professional work in other posts on the forum. But again this is the beginner level with no tools that anyone can do and I don’t claim to be an expert or PRO. It might encourage others to take a new project and some may take it to higher standards. Wish to share with community to act as inspiration to utilise the free energy.
Note : My video is in Punjabi and English mix with subtitles and I am not very good with Hindi so kindly excuse if you don’t understand it with clarity. Proud to be a part of this community and contributing my little share.
Disclaimer: There are fellow members who are at expert level and they may rate it at level 1 or 2 on scale of 1 to 10 if we compare it to some professional work in other posts on the forum. But again this is the beginner level with no tools that anyone can do and I don’t claim to be an expert or PRO. It might encourage others to take a new project and some may take it to higher standards. Wish to share with community to act as inspiration to utilise the free energy.
Note : My video is in Punjabi and English mix with subtitles and I am not very good with Hindi so kindly excuse if you don’t understand it with clarity. Proud to be a part of this community and contributing my little share.
Democracy is two wolves and a lamb voting on what to have for lunch. Liberty is a WELL-ARMED lamb contesting the vote!
BENJAMIN FRANKLIN
BENJAMIN FRANKLIN
-
- Shooting true
- Posts: 643
- Joined: Sat Nov 14, 2015 10:40 am
Re: DIY Re-polishing my 30-06 Rifle at home in a few hundred rupees
Great Work in small budget Paaji.
Congrats
Congrats
Regards
Shivaji
Shivaji
- Ajaaybeer
- Almost at nirvana
- Posts: 132
- Joined: Wed Jan 10, 2018 11:45 pm
- Contact:
Re: DIY Re-polishing my 30-06 Rifle at home in a few hundred rupees
Coincidentally, I forgot to delete some photos taken in my phone during this diy project last year which clearly shows the kind of wood I.O.F uses for the rifle. I am sharing those photos where we can notice the exposed grain of the wood without polish. Only sealer has been applied.
You do not have the required permissions to view the files attached to this post.
Democracy is two wolves and a lamb voting on what to have for lunch. Liberty is a WELL-ARMED lamb contesting the vote!
BENJAMIN FRANKLIN
BENJAMIN FRANKLIN
-
- Shooting true
- Posts: 752
- Joined: Tue Mar 13, 2007 8:28 pm
- Location: India
Re: DIY Re-polishing my 30-06 Rifle at home in a few hundred rupees
The iron sight may be practical for target shooting but one of the ugliest I have ever witnessed. In fact those are surplus SLR sights used by our forces. I am sure there are smiths around to remedy this as well. Indeed a very good job done in the limited resources available with a fair amount of elbow grease. Kudos !!!
Marksman
Marksman
- SniPeR30-06
- Fresh on the boat
- Posts: 12
- Joined: Thu Apr 25, 2024 10:25 am
Re: DIY Re-polishing my 30-06 Rifle at home in a few hundred rupees
These are not SLR sights sir. SLR have peep sight in the rear.marksman wrote: ↑Sun Sep 18, 2022 7:49 pmThe iron sight may be practical for target shooting but one of the ugliest I have ever witnessed. In fact those are surplus SLR sights used by our forces. I am sure there are smiths around to remedy this as well. Indeed a very good job done in the limited resources available with a fair amount of elbow grease. Kudos !!!
Marksman
-
- On the way to nirvana
- Posts: 74
- Joined: Wed Dec 20, 2017 10:37 pm
Re: DIY Re-polishing my 30-06 Rifle at home in a few hundred rupees
good work buddy
i have stained my gun stock with instant coffee mixed with lit water and boiled with continuous stirring and boiling to make it lit thick
can apply this with a soft cloth, wipe excess.
let it dry over night
put some hair dryer gently.
can rub this with a steel wool or very fine emery paper
and it can be further sealed with a wood finishing lacquer glossy or matt
as per ur taste
it gives awesome finish.
i have stained my gun stock with instant coffee mixed with lit water and boiled with continuous stirring and boiling to make it lit thick
can apply this with a soft cloth, wipe excess.
let it dry over night
put some hair dryer gently.
can rub this with a steel wool or very fine emery paper
and it can be further sealed with a wood finishing lacquer glossy or matt
as per ur taste
it gives awesome finish.
-
- Learning the ropes
- Posts: 44
- Joined: Thu Oct 09, 2008 9:46 pm
- Location: PUNJAB
Re: DIY Re-polishing my 30-06 Rifle at home in a few hundred rupees
Hi Ajaybeer ji,
In my opinion this is the best DIY job done on the IOF 30-06 for the budget as described by you, plus it gives you satisfaction of improving upon your weapon yourself.
Regards
Gurbir Singh
In my opinion this is the best DIY job done on the IOF 30-06 for the budget as described by you, plus it gives you satisfaction of improving upon your weapon yourself.
Regards
Gurbir Singh
- Vikram
- We post a lot
- Posts: 5106
- Joined: Fri Jun 02, 2006 6:14 am
- Location: Tbilisi,Georgia
Re: DIY Re-polishing my 30-06 Rifle at home in a few hundred rupees
Thank you for sharing your effort, Ajaybeer. One has to start somewhere and this is not a bad start at all. A lot better than anything that I have done as I never did anything like this. It will motivate others and of course yourself to continue to the journey.
It ain’t over ’til it’s over! "Rocky,Rocky,Rocky....."