IHP with APEX / Diana Seal

[tirths]

Choose the spring based on your objective. The spring you have mentioned will fit.

[sa_ali]

Objective is as clear as arjun shooting the fish eye.
I have get rid of REALLY BIG SIZE RATS. They are capable of climbing to 8th flr . They have made whole in almost all the doors.
Even the cats in the neighborhood, are afraid of attacking them.

So i need really good power shoots to a distance of 10meter.

So for that are these springs good enough along with Seal change which you have suggested.

Also bro, did you get the seal and adapter both from ARH
http://www.airrifleheadquarters.com/pag ... 251327.htm.

May be i can do the same.

[sa_ali]

Hi

After lot of googling and putting more than 2 days. Yesterday i packed my IHP 25 and handed it over to Shamshudin gunsmith.
I asked him about the synthetic seal, but his vote was for the leather one for the IHP. He will put the IHP spring in it only. He said my gun wasnt good enough to waste money on any other spring and he said he will ensure that i am able to put a whole in tin box on 10 meters . Which i think would be good enough .
Total it would cost me 1200/ as my sight bridge is gone to and that itself would cost 400/-
Cant wait to have it back

[veejosh]

Hi

After lot of googling and putting more than 2 days. Yesterday i packed my IHP 25 and handed it over to Shamshudin gunsmith.
I asked him about the synthetic seal, but his vote was for the leather one for the IHP. He will put the IHP spring in it only. He said my gun wasnt good enough to waste money on any other spring and he said he will ensure that i am able to put a whole in tin box on 10 meters . Which i think would be good enough .
Total it would cost me 1200/ as my sight bridge is gone to and that itself would cost 400/-
Cant wait to have it back

Sad that you don't trust the reports of those who have tried it. Moreover, if you have some time I feel its always better to try and follow instructions and do it yourself. You will later be proud of yourself and the work you did and also know and understand your gun better. Give it a thought.

Regards
Vikas

[sa_ali]

removed. couldnt delete it tirths sorry

[sa_ali]

removed. couldnt delete it tirths sorry

moderator, pls delete it.

[tirths]

Hi

I am back from Village vacation. Well Rs 1500/- given to shamshuddin for the IHP Airgun Model 25B re conditioning, worth every penny. it turned out to dream run.
The Master pellets were penetrating into the Hard into 1" thick wooden plank . My mistake i didnt take pics of that that shattered wooden plank on more than 10 mtr distance, that plank was good solid very old wood, not one of those soft new wood.
I have fired around 400 Shots, The spring is still rock solid while load.
So i would recommend getting airgun spring change done by him. It costed me more as i had rear sight placed too. Original was missing, so he installed another one.

Dear Sa_ali, Looks like you are all set to hijacking this thread! Please remove all posting made by you is not aligned with the subject. IF you want to say something regarding you friend gunsmith please create another thread to start with.

[brihacharan]

Hi Tirths,

Saw your post on the seal & adaptor for IHP 35 22 cal air rifle. Simply amazing! I have a 22 cal IHP35 with a Walther Scope mounted. Want to know if your seal & adaptor can be installed in my weapon without any alteration to the power plant? If so I would like a seal and adaptor if you can spare these. How much would these cost?

I was in Chennai a couple of months ago, but as luck would have it I registered with IFG only early this month. Wish I had done earlier which would have given me the opportunity to meet you. Could you give me your telephone number - may be I could speak to you. Awaiting your reply asap.

Cheers & regards,
Brihacharan

[tirths]

Hi Tirths,

Saw your post on the seal & adaptor for IHP 35 22 cal air rifle. Simply amazing! I have a 22 cal IHP35 with a Walther Scope mounted. Want to know if your seal & adaptor can be installed in my weapon without any alteration to the power plant? If so I would like a seal and adaptor if you can spare these. How much would these cost?

I was in Chennai a couple of months ago, but as luck would have it I registered with IFG only early this month. Wish I had done earlier which would have given me the opportunity to meet you. Could you give me your telephone number - may be I could speak to you. Awaiting your reply asap.

Cheers & regards,
Brihacharan

You will find them in the following link:
Seal: This thread has been edited to conform with Indian For Guns policy as stated in the Announcements forum
Adapter: This thread has been edited to conform with Indian For Guns policy as stated in the Announcements forum

Please check your PM to see my no.

[sa_ali]

Dear Sa_ali, Looks like you are all set to hijacking this thread! Please remove all posting made by you is not aligned with the subject. IF you want to say something regarding you friend gunsmith please create another thread to start with.

I have no what so ever intention of hijacking the subject, it was sequence of events thats it.
Well the gunsmith is not my friend, had that being the case he wont have charged me Rs1500/-

I am removing the posts

[tirths]

Thanks Sa_ali

[brihacharan]

Hi Tirths,

> Need your advice on the trigger mechanism of IHP35 22 cal air rifle. Mine is a tad too hard on the pull & not smooth. The feel is not the same as I used to have in my Winchester 30-06. Since I am planning to fit the Diana Seal & Adaptor, thought I might as well attend to the trigger too. Is there a trigger assembly available seperately? If not how do I go about achieving a smoother pull in my IHP35. Pl. let me know.

Regards
Brihacharan

[tirths]

Hi Tirths,

> Need your advice on the trigger mechanism of IHP35 22 cal air rifle. Mine is a tad too hard on the pull & not smooth. The feel is not the same as I used to have in my Winchester 30-06. Since I am planning to fit the Diana Seal & Adaptor, thought I might as well attend to the trigger too. Is there a trigger assembly available seperately? If not how do I go about achieving a smoother pull in my IHP35. Pl. let me know.

Regards
Brihacharan

custom fit Seal will surely give you a all different new shooting experience. I am almost running out of stock due to heavy demand. For trigger I have answered already.

Regards,
Tirtha