Review: Precihole PX100 Achilles

[Jagannatha]

Sorry, but still it seams that there is no regulator in PX100. It has just an air valve. PCP Air Rifle regulators look different of what I see inside this rifle

[K Vanlalrengpuia]

Sir, Can you please explain about PX100 mk2 hammer spring, any accuracy better, or Shot count, what is the advantage of mk2 hammer spring

[K Vanlalrengpuia]

eaglevisioncam.com side cam mount and Casio camera on my Achilles.
WhatsApp Image 2019-07-25 at 7.02.45 PM.jpeg

Where can i find side mount please any link

[GNV]

eaglevisioncam.com

[Abhilashdsar]

Thanks sir

[Jagannatha]

There are a lot more modifications using after market parts and modification for Achilles already proved themselves which can deliver 24 ft lbs with a very reduced shot count per fill.

Managed to achieve 272 m/s (892 fps) with JSB 0.87 g (13.43 gr). I'll test it on different distances. If the results are not good, will decrease the power and shift to JSB 0.67.
With this setup shot count decreased to 30. Trying to find a solution to connect bigger air cylinder. They all have 5 cm minimum OD. It just will not fit to the standard cylinder port. Any ideas? Connectors? Maybe some one has a turning or CNC machine and can make a "Z" connector between valve an cylinder?

[GNV]

Why screw up a perfectly functioning consistently accurate PCP?

[pm40909]

Why screw up a perfectly functioning consistently accurate PCP?

Sir,
I need to talk to you. The message on mail is not going through , maybe some issue with the site.
Kindly share your contact No so that I may speak to you or message you.
Regards,
Puneet

[rajkumar]

There are a lot more modifications using after market parts and modification for Achilles already proved themselves which can deliver 24 ft lbs with a very reduced shot count per fill.

Managed to achieve 272 m/s (892 fps) with JSB 0.87 g (13.43 gr). I'll test it on different distances. If the results are not good, will decrease the power and shift to JSB 0.67.
With this setup shot count decreased to 30. Trying to find a solution to connect bigger air cylinder. They all have 5 cm minimum OD. It just will not fit to the standard cylinder port. Any ideas? Connectors? Maybe some one has a turning or CNC machine and can make a "Z" connector between valve an cylinder?

Hi Jagan,
Could you please explain..
The above power upgrade is with MK-II spring or any other after market parts..??
Thank you..

[Jagannatha]

Hi Jagan,
Could you please explain..
The above power upgrade is with MK-II spring or any other after market parts..??
Thank you..

It's little bit more than just a spring. Drilling, polishing....

[GNV]

It is an irreversible modification.

[Jagannatha]

It is an irreversible modification.

Yes! And if you don't know how to do them and have no technical experience, it's better not to touch anything. Otherwise you'll just spoil a good gun.