Indians For Guns

gmodgil wrote: ↑

Thu May 20, 2021 10:23 am

Hello all,
I recently Baught the PX100 Achilles. While i am having fun with it, I noticed a small development oversight. Not sure if this is intentional.
While the Rifle comes with Rear peep sight by default, the Front Peep sight adaptor is surprisingly missing for PX100.
Support says adaptor for px100 not availble, while it is available for the Spring Cousins. So Front Peep Sight not possible for PX100.
Would be Happy if Experts in the Group can provide a Workaround.
Thanks,
Gaurav Modgil

Jagannatha wrote: ↑

Tue Apr 27, 2021 8:34 pm

Hey guys!
Just want to share with you some pictures of my new home made sound moderator for PX100.
Inside cups and tube are 3D designed and printed. The outer tube is made of carbon fiber. 3D printed parts were glued inside carbon tube with epoxy.
Moderator works just perfect. It is really quite. Also if we compare it with my previous steel/aluminum one they are of the same design (4 cm space after muzzle plus 4 cups) but the new one is 3 times lighter.
[/quo

May I get the contact details for getting this 3D printed modarator?

Jagannatha wrote: ↑

Sun May 23, 2021 11:19 pm

Now working on the speed regulator. The idea is taken from other brands - you have a screw and you rotate it to adjust the velocity without disassembling the rifle. Turning the screw effects the tension of the hammer spring. Will share the details soon.
The propose is - find your best point of impact with different pellets and speeds without disassembling.

Babygun007 wrote: ↑

Sun Jun 27, 2021 9:43 pm

Dear Sirs,

Do we need to empty the cylinder for changing hammer spring in px100 or we can do it even there is air in the cylinder, provided not touching any part except hammer spring section.

Please advise.

Jagannatha wrote: ↑

Sun May 23, 2021 11:19 pm

Now working on the speed regulator. The idea is taken from other brands - you have a screw and you rotate it to adjust the velocity without disassembling the rifle. Turning the screw effects the tension of the hammer spring. Will share the details soon.
The propose is - find your best point of impact with different pellets and speeds without disassembling.

Mashiro wrote: ↑

Fri Jul 16, 2021 1:52 am

Hi bro Jagan.. can I get in touch with you through fb/insta?

Kharsang wrote: ↑

Wed Aug 25, 2021 9:58 pm

Hi... Can someone please tell me if the diameters of long and short barrel variants of PX100 the same? Are the barrels interchangeable?
Thanks

Jagannatha wrote: ↑

Tue Apr 27, 2021 8:34 pm

Hey guys!
Just want to share with you some pictures of my new home made sound moderator for PX100.
Inside cups and tube are 3D designed and printed. The outer tube is made of carbon fiber. 3D printed parts were glued inside carbon tube with epoxy.
Moderator works just perfect. It is really quite. Also if we compare it with my previous steel/aluminum one they are of the same design (4 cm space after muzzle plus 4 cups) but the new one is 3 times lighter.